📘
NeuroMINT Resources
search
⌘Ctrlk
📘
NeuroMINT Resources
  • Home
  • Basics and Policies
  • Literature
  • Technical Guides
    • Drosophibot II
    • Circuit Board Components
    • I2C Communication with Arduino
    • Electronic (PCB) Design
    • Parallella
    • Anaconda Installation & Setup Guide (Windows 10)
    • OHAUS Ranger 3000 Scale
    • MarkForged II 3D Printer
    • Dynamixel Smart Servos
      • When should you use the nylon shim?
      • First Time Servo Setup (with the Dynamixel Wizard)
      • Programming Servo Motions with a Personal Computer
      • Reading Servo Motions with a Personal Computer
      • Programming Servo Motions with DynamixelSDK in Matlab on a Personal Computer
        • Windows
        • Linux
      • Programming Servo Motions with DynamixelSDK on OpenCM 9.04 Microcontroller
      • Using a Microcontroller as an Intermediary
      • Using a Microcontroller as an Intermediary - SyncWrite and BulkRead
      • Using AnimatLab to Control a Robot
    • Strain Gauges
    • Synthetic Nervous Systems and the Functional Subnetwork Approach
    • Robot Design
    • Raspberry Pi + Zumo + Pixy setup
    • Beginners Guide: Soldering
    • Intel NUC for Running Robots
  • Logos and Templates
  • Student Progression Resources
gitbookPowered by GitBook
block-quoteOn this pagechevron-down
  1. Technical Guideschevron-right
  2. Dynamixel Smart Servoschevron-right
  3. Programming Servo Motions with DynamixelSDK in Matlab on a Personal Computer

Linux

PreviousWindowschevron-leftNextProgramming Servo Motions with DynamixelSDK on OpenCM 9.04 Microcontrollerchevron-right

Was this helpful?

Was this helpful?